React Layout

React Bootstrap Layout

Note: This documentation is for an older version of Bootstrap (v.4). A newer version is available for Bootstrap 5. We recommend migrating to the latest version of our product - Material Design for Bootstrap 5.
Go to docs v.5

Components and options for laying out your Bootstrap project, including wrapping containers, a powerful grid system, a flexible media object, and responsive utility classes.


Containers are the most basic layout element in Bootstrap and are required when using our default grid system. Choose from a responsive, fixed-width container (meaning its max-width changes at each breakpoint) or fluid-width (meaning it’s 100% wide all the time).

While containers can be nested, most layouts do not require a nested container.

            <!-- Content here -->

Container fluid

Use fluid prop for a full-width container, spanning the entire width of the viewport.

          <MDBContainer fluid>
            <!-- Content here -->

Bootstrap comes with three different containers:

  • .container, which sets a max-width at each responsive breakpoint
  • .container-fluid, which is width: 100% at all breakpoints
  • .container-{breakpoint}, which is width: 100% until the specified breakpoint
      <MDBContainer size="sm">
        <!-- Content here -->

      <MDBContainer size="md">
        <!-- Content here -->

      <MDBContainer size="lg">
        <!-- Content here -->

      <MDBContainer size="xl">
        <!-- Content here -->


The table below illustrates how each container’s max-width compares to the original .container and .container-fluid across each breakpoint.

Extra small
Extra large
.container 100% 540px 720px 960px 1140px
.container-sm 100% 540px 720px 960px 1140px
.container-md 100% 100% 720px 960px 1140px
.container-lg 100% 100% 100% 960px 1140px
.container-xl 100% 100% 100% 100% 1140px
.container-fluid 100% 100% 100% 100% 100%

Responsive breakpoints

Since Bootstrap is developed to be mobile first, we use a handful of media queries to create sensible breakpoints for our layouts and interfaces. These breakpoints are mostly based on minimum viewport widths and allow us to scale up elements as the viewport changes.

Bootstrap primarily uses the following media query ranges—or breakpoints—in our source Sass files for our layout, grid system, and components.


            // Extra small devices (portrait phones, less than 576px)
            // No media query for `xs` since this is the default in Bootstrap

            // Small devices (landscape phones, 576px and up)
            @media (min-width: 576px) { ... }

            // Medium devices (tablets, 768px and up)
            @media (min-width: 768px) { ... }

            // Large devices (desktops, 992px and up)
            @media (min-width: 992px) { ... }

            // Extra large devices (large desktops, 1200px and up)
            @media (min-width: 1200px) { ... }


Since we write our source CSS in Sass, all our media queries are available via Sass mixins:

            // No media query necessary for xs breakpoint as it's effectively `@media (min-width: 0) { ... }`
            @include media-breakpoint-up(sm) { ... }
            @include media-breakpoint-up(md) { ... }
            @include media-breakpoint-up(lg) { ... }
            @include media-breakpoint-up(xl) { ... }

            // Example: Hide starting at `min-width: 0`, and then show at the `sm` breakpoint
            .custom-class {
              display: none;

            @include media-breakpoint-up(sm) {
              .custom-class {
                display: block;

We occasionally use media queries that go in the other direction (the given screen size or smaller):

            // Extra small devices (portrait phones, less than 576px)
            @media (max-width: 575.98px) { ... }

            // Small devices (landscape phones, less than 768px)
            @media (max-width: 767.98px) { ... }

            // Medium devices (tablets, less than 992px)
            @media (max-width: 991.98px) { ... }

            // Large devices (desktops, less than 1200px)
            @media (max-width: 1199.98px) { ... }

            // Extra large devices (large desktops)
            // No media query since the extra-large breakpoint has no upper bound on its width

Note that since browsers do not currently support range context queries, we work around the limitations of min- and max- prefixes and viewports with fractional widths (which can occur under certain conditions on high-dpi devices, for instance) by using values with higher precision for these comparisons.

Once again, these media queries are also available via Sass mixins:

            @include media-breakpoint-down(xs) { ... }
            @include media-breakpoint-down(sm) { ... }
            @include media-breakpoint-down(md) { ... }
            @include media-breakpoint-down(lg) { ... }
            // No media query necessary for xl breakpoint as it has no upper bound on its width

            // Example: Style from medium breakpoint and down
            @include media-breakpoint-down(md) {
              .custom-class {
                display: block;

There are also media queries and mixins for targeting a single segment of screen sizes using the minimum and maximum breakpoint widths.

            // Extra small devices (portrait phones, less than 576px)
            @media (max-width: 575.98px) { ... }

            // Small devices (landscape phones, 576px and up)
            @media (min-width: 576px) and (max-width: 767.98px) { ... }

            // Medium devices (tablets, 768px and up)
            @media (min-width: 768px) and (max-width: 991.98px) { ... }

            // Large devices (desktops, 992px and up)
            @media (min-width: 992px) and (max-width: 1199.98px) { ... }

            // Extra large devices (large desktops, 1200px and up)
            @media (min-width: 1200px) { ... }

These media queries are also available via Sass mixins:

            @include media-breakpoint-only(xs) { ... }
            @include media-breakpoint-only(sm) { ... }
            @include media-breakpoint-only(md) { ... }
            @include media-breakpoint-only(lg) { ... }
            @include media-breakpoint-only(xl) { ... }

Similarly, media queries may span multiple breakpoint widths:

            // Example
            // Apply styles starting from medium devices and up to extra large devices
            @media (min-width: 768px) and (max-width: 1199.98px) { ... }

The Sass mixin for targeting the same screen size range would be:

            @include media-breakpoint-between(md, xl) { ... }


Several Bootstrap components utilize z-index, the CSS property that helps control layout by providing a third axis to arrange content. We utilize a default z-index scale in Bootstrap that’s been designed to properly layer navigation, tooltips and popovers, modals, and more.

These higher values start at an arbitrary number, high and specific enough to ideally avoid conflicts. We need a standard set of these across our layered components—tooltips, popovers, navbars, dropdowns, modals—so we can be reasonably consistent in the behaviors. There’s no reason we couldn’t have used 100+ or 500+.

We don’t encourage customization of these values; should you change one, you likely need to change them all.

          $zindex-dropdown: 1000 !default;
          $zindex-sticky: 1020 !default;
          $zindex-fixed: 1030 !default;
          $zindex-modal-backdrop: 1040 !default;
          $zindex-modal: 1050 !default;
          $zindex-popover: 1060 !default;
          $zindex-tooltip: 1070 !default;

To handle overlapping borders within components (e.g., buttons and inputs in input groups), we use low single digit z-index values of 1, 2, and 3 for default, hover, and active states. On hover/focus/active, we bring a particular element to the forefront with a higher z-index value to show their border over the sibling elements.

React Container - API

In this section you will find advanced information about the Container component. You will find out which modules are required, what are the possibilities of configuring the component, and what events and methods you can use in working with it.

Container import statement

In order to use Box component make sure you have imported proper module first.

          import { MDBContainer } from "mdbreact";

API Reference: Container Properties

The table below shows the configuration options of the MDBContainer component.

Name Type Default Description Example
className String Adds custom classes <MDBContainer className="myClass" />
tag String div Changes default tag <MDBContainer tag="section" />
fluid boolean false Add container-fluid class <MDBContainer fluid />
size string This props allows to use responsive containers. You can set container with breakpoints like sm, md, lg, xl. <MDBContainer size="sm" />